Advanced Keys AK-104 Manual de usuario descargar pdf (Pagina 3)

SYSTEM FUNCTIONS DESCRIPTION

1. Smart Keyless Entry Function

Smart Keyless Entry function can be disabled for car wash, service, valet purposes.

To disable/enable this function: with door closed, switch Ignition to ACC, depress and hold brake

pedal then press and hold the REMOTE START and LOCK together for 2 seconds until horn

honks. Vehicle will honk once if function is enabled or twice if disabled. While the Smart Entry function

is disabled; the security indicator will flash Blue when armed.

Attention if the Smart Keyless Entry function is disabled:

• A valid Smart Key is still required and sensed within the proximity to disarm/start the vehicle.

Entering or starting vehicle without the Smart Key will set off the alarm function.

• Doors will not be locked or unlocked automatically when departing or approaching the vehicle.

Make sure to lock the door manually when departing from the vehicle.

2. Security /Alarm Function (Valet Mode)

The Security / Alarm function monitors the shock sensor, door switch, brake and ignition while system

is in armed state. If vehicle is violated system will sound horn (or siren if installed) and flash parking

lights for 30 seconds. However, ignition and starter function will be disabled until disarmed by a valid

Smart Key or a Bypass Transponder Card. Security indicator will flash Red rapidly upon disarm to

remind driver that the alarm function was triggered while driver was away. Alarm function can be

disabled if it is not required. To disable/enable this function: with door closed, switch Ignition to ACC

and press and hold the brake pedal then press and hold the REMOTE START and UNLOCK

together for 2 seconds until horn honks. Vehicle will honk once if function is enabled or twice if

disabled. After alarm function is disabled; the security indicator will flash purple when armed.

Attention if the Security / Alarm function is disabled:

• Alarm will not sound when the shock sensor, door, ignition triggered.

• The Starter Kill Relay (if installed) or the Push-Start system will continue to function; therefore,

engine cannot be started without sensing a valid Smart Key.

3. Door Lock Delay Function

The Door Lock Delay function prevents unwanted automatic locking and unlocking of the door while

user frequently enter and exit the sensing range with Smart Keys. (i.e. unloading luggage, helping

passenger out or temporarily leaving the vehicle etc.) This function will disable the automatic locking

function for 5 minutes if any door opened during the first minute of the activation, or it will time out in

the first minute if all doors remain closed. The Door Lock Delay Function will delay system response to

the Door-Not-Closed-Reminder function, please ensure all doors are closed before leaving the vehicle.

Ways to Activate the Door Lock Delayfunction

• Press UNLOCK to unlock the doors and activate the Door Lock Delay. Parking lights will flash

to indicate Smart Key Function is inactive. Press the UNLOCK to extend the delaytime.

• Before Starting the vehicle: Approach the vehicle with the Smart Key, once the vehicle disarmed

and unlocked, enter the vehicle and applybrake pedal 2x quickly.

• After turning the vehicle off: Turn ignition OFF and applybrake pedal 2x quickly.

Ways to Exit the Door Lock Delay function

• The Door Lock Delay function will time-out after 5 minutes if any door was opened during the first

minute of the activation, or it will time out in the first minute if all doors remain closed.

• Press LOCK to exit Door Lock Delay Function.

• Apply and hold the brake pedal for more than 1 second.

Attention:

• If an extended period of time is needed to be in the close proximity to the vehicle for activities like

car wash / service / valet, it is suggested to disable the Smart Keyless Entry function temporarily.

• To disable/enable this function: with door closed, switch Ignition to ACC, apply the brake and

press LOCK 1x then press and hold REMOTE START and UNLOCK together for 2

seconds until horn honks. Vehicle will honk once if function is enabled or twice if disabled.

• Not recommended to disable the Door Lock Delay Function. Once UNLOCK is triggered, the

Smart Key Function will be suspended and vehicle will not auto lock/unlock doors until LOCK .

is triggered. In addition, parking lights will NOT flash to indicate Smart Key Function is inactive.

1 2 3 4 5 6 7

Comentarios a estos manuales

Sin comentarios

Advanced Keys AK-104 Manual de usuario Pagina 3

Comentarios a estos manuales